Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 So So

About Watmuff501

  • Rank
    No mates
  • Birthday 03/09/1987

Profile Information

  • Your name

Recent Profile Visitors

1,240 profile views
  1. Afternoon all, I have been doing some reading up on brake improvements for my K9 750 and some say that the K9 1000 Tokico calipers are good if your on a budget. The mononlock from the K9 1000 is better than the K9 750 calipers which are bolted together and flex. Just wondering if anyone has fitted them to make an improvement and how it went? I know there are R6/R1 calipers out there that fit, but from reading up on the K9 1000 calipers they are a straight swap and I can use the pads that I have for my 750 in them too. Any help would be appreciated. TIA.
  2. Wouldn't mind a set of Tokico Monoblock calipers from a GSXR 1000 2009 Onwards. 108mm. What's about? Many thanks
  3. As per title. In used condition, used as a spare on my GSXR 750. 50mm inlet. Pics available on request. Or can be viewed on Evilbay at: https://www.ebay.co.uk/itm/174255914243 Many thanks.
  4. I use sbs dual carbon, good pad in my opinion. Better in higher temperatures though.
  5. How much for the calipers and spacers mate?
  6. Yeah I thought they were 108mm. I know that r6 / r1 calipers are a direct fit with a change in spacers but I thought that it was a certain year of r6 / r1 that fit.
  7. Afternoon, I'm sure this question has been asked many times before so I'll apologise in advance. I'm thinking of upgrading the calipers on my gixer 750 K9. Cant really afford Brembo's, but recall someone saying that an R6 / R1 calliper will also fit as they have the same bolt spacings? Could someone tell me what year R6 / R1 calipers I would need and what / where I can get the spacers needed to make them fit? Thanks in advance
  8. I have a brembo folding lever attached to my Brembo 19 rcs master cylinder. Unfortunately the lever was damaged in a recent off. Does anyone know if you can buy the static part of the lever that attaches to the MC separate to the folding bit of the lever or is there anywhere that does an aftermarket version that the lever can attached to and will fit that MC. A complete new folding Brembo lever is £175 which I think is excessive. I have tried to upload an image of what part i am talking about but the image is too large. Cheers
  9. Sorry ladies and gents. The pictures won't upload due to their size. If you would like images then message me with your email address and I'll forward them on Many thanks
  10. For some reason they have not uploaded. If you give me your email address I'll forward them to you. Many thanks
  11. Carcoon, Motorbike Bike Bubble used.. Condition is Used. Dispatched with Royal Mail 2nd Class. I've had this for a couple of years and it has been a god send. Kept my race bike in pristine condition in a cold / damp garage. This is a used item so will show signs of use but it is in full working order as you can see from the pictures. There are no rips or tears and it fully inflates. I have provided some rough measurements in the pictures but it will hold a large tourer bike if needed. You can get the manufacturer measurements off their website. It is the larger of the Carcoon bike bubbles. Thi
  12. Hello again, I've bought a few bits and bobs from you in the passed. I'm just wondering if you have a racing screen for a 750 K8 / K9 lieing around by any chance? Cheers
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.