Jump to content


Photo

Spyball Alarm Resetting Codes


  • Please log in to reply
10 replies to this topic

#1 Bridgette

Bridgette

    The lights are on but...

  • Banned
  • PipPipPipPipPipPipPipPipPip
  • 5,987 posts
  • Gender:Female

Posted 23 March 2010 - 08:31 PM

A friend of mine needs the resetting codes for a Spyball Alarm and we can't find them anywhere. Apparently they are available on the net somewhere.

Can anyone point us in the right direction please?
<p>You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.<br><br />
 </p>

#2 Ross Barnes # 42

Ross Barnes # 42

    Talkative

  • Members
  • PipPip
  • 22 posts
  • Gender:Male

Posted 23 March 2010 - 10:08 PM

The last I heard Spyball went bust... Good Luck

Ross #42

Sponsored by Chasbikes Ltd SE11 6SF
Chasbikes.co.uk


#3 Bridgette

Bridgette

    The lights are on but...

  • Banned
  • PipPipPipPipPipPipPipPipPip
  • 5,987 posts
  • Gender:Female

Posted 23 March 2010 - 10:32 PM

I've been told that the resetting codes are on the net somewhere.... but where I have no idea, as I can't find them.

My friend lost his son in a bike accident 7 years ago. He has been rebuilding the bike with the intention of returning it to its former glory in memory of his son. He's nearly there now but as the alarm hasn't been used for so long, it keeps setting itself off. The altnernative is to do away with it and put another one on, but he would like to keep it all as it is if possible, hence finding the alarm resetting codes would be ideal.
<p>You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.<br><br />
 </p>

#4 Pornstar

Pornstar

    Not the real slim shady

  • Members
  • PipPipPipPipPipPip
  • 377 posts
  • Gender:Male
  • Interests:Anything that goes fast.......! Fine beers and exotic women. Shafting the taxman.

Posted 24 March 2010 - 09:30 AM

I had a Spyball, and it was a right pain in the backside. The reset codes are specific to each individual unit and come on a credit card sized bit of card with each alarm. If you can't find that then you are scuppered. I had so much grief with mine I ended up binning the thing after it ate 3 batteries and generally wound me up. :angry:

As mentioned Spyball went bust a few years ago coz their products were a load of old toot... :blink:

My advice would be to take it off the loom, not too tricky to do and launch it into the nearest skip. :)
Dave Harviek
# 22 BMCRC Thunderbike

#5 Bridgette

Bridgette

    The lights are on but...

  • Banned
  • PipPipPipPipPipPipPipPipPip
  • 5,987 posts
  • Gender:Female

Posted 24 March 2010 - 10:44 AM

Thanks, Dave. Sounds like binning it is the best option.
<p>You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.<br><br />
 </p>

#6 Ross Barnes # 42

Ross Barnes # 42

    Talkative

  • Members
  • PipPip
  • 22 posts
  • Gender:Male

Posted 28 March 2010 - 03:40 PM

I've spoken to a few people for you and this is all I can tell you for the time being.

SYPBALL 8510 Realign Process:

Press Raised Button Once
Then
Press and hold raised button for 40 seconds

This should then re sync the fob to the alarm its self.

It is doesn't work at first then wait 5 mins and try again.
If after 5 attempts it doesn't work try to call the customer help line. (If it still exists)

Im trying to get hold of the wiring diagram at the moment... if I can find it and upload it then you should be able to just bypass it without having to remove it from the bike.

Ross #42

Sponsored by Chasbikes Ltd SE11 6SF
Chasbikes.co.uk


#7 Bridgette

Bridgette

    The lights are on but...

  • Banned
  • PipPipPipPipPipPipPipPipPip
  • 5,987 posts
  • Gender:Female

Posted 28 March 2010 - 07:45 PM

Thanks Ross, that's a great start. I'll pass the info on. It's been a real labour of love to restore the bike and now he's got to the final stages the alarm has been the most testing part :rolleyes:

Thanks again!!
<p>You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.<br><br />
 </p>

#8 Ross Barnes # 42

Ross Barnes # 42

    Talkative

  • Members
  • PipPip
  • 22 posts
  • Gender:Male

Posted 28 March 2010 - 10:32 PM

Motrax are official importers try giving them a call on 01933 418414 if the reset doesnt work.

Ross #42

Sponsored by Chasbikes Ltd SE11 6SF
Chasbikes.co.uk


#9 Bridgette

Bridgette

    The lights are on but...

  • Banned
  • PipPipPipPipPipPipPipPipPip
  • 5,987 posts
  • Gender:Female

Posted 28 March 2010 - 10:42 PM

Motrax are official importers try giving them a call on 01933 418414 if the reset doesnt work.


Many thanks!! ;)
<p>You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.<br><br />
 </p>

#10 Bridgette

Bridgette

    The lights are on but...

  • Banned
  • PipPipPipPipPipPipPipPipPip
  • 5,987 posts
  • Gender:Female

Posted 10 April 2010 - 08:45 PM

I've spoken to a few people for you and this is all I can tell you for the time being.

SYPBALL 8510 Realign Process:

Press Raised Button Once
Then
Press and hold raised button for 40 seconds

This should then re sync the fob to the alarm its self.

It is doesn't work at first then wait 5 mins and try again.
If after 5 attempts it doesn't work try to call the customer help line. (If it still exists)

Im trying to get hold of the wiring diagram at the moment... if I can find it and upload it then you should be able to just bypass it without having to remove it from the bike.





It worked!! Thank you so much. Bike is nearly ready for it's first outing in 7 years.

Many thanks.
<p>You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.<br><br />
 </p>

#11 Ross Barnes # 42

Ross Barnes # 42

    Talkative

  • Members
  • PipPip
  • 22 posts
  • Gender:Male

Posted 12 April 2010 - 05:29 AM

No Worries... Just glad it worked out for you

Ross #42

Sponsored by Chasbikes Ltd SE11 6SF
Chasbikes.co.uk





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users