Jump to content

Search the Community

Showing results for tags 'bsb'.

More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • Racing
    • Club Racing
    • Road Racing
    • MotoGP
    • Superbikes
    • Sidecars
    • Trackdays
    • General Banter
  • For Sale
    • Race Bikes
    • Trackday Bikes
    • Parts & Accessories
    • Paddock & Pitlane Kit
    • Garage & Tools
    • Transport
    • Sidecars


  • briggs57's Blog
  • speads' Blog
  • ronnie scott's Blog
  • wavemeister's Blog
  • Dalebteal@gmail.com's Blog
  • How to Unclog Epson Print Heads?
  • dog78

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start





Website URL





First Name


House or flat number or name

Street and Town

Post code

Your name


I understand that only I and admin can see address details on screen

Found 44 results

  1. For sale is my 2015 ZX10 Ex BSB Superbike. This bike is not to be confused with normal ZX10 race or track bikes advertised...........this is a full superbike very similar to Haslams championship winning bike from this year. This bike is an ex Morrelo superbike from 2015 which at the time were built and prepared by Ray Stringer. The bike is currently running a fresh MSS motor with a mild tune (196bhp) however the original Ray Stringer Superbike motor is available by seperate negotiation. Please see the spec of the Stringer motor at the bottom of this advert. The specification of this bike is as follows: Chassis: - Standard unbraced Kawasaki Frame. modified to hold Ktech Damper - Ktech KTR3 Forks (recently serviced by TW suspension) - Superbike Billet Yokes - Ktech DDS Rear shock with remote pre-load - FTR Swingarm with carbon hugger and underslung calliper and quick release wheel system. As with most FTR swingarms it has been repaired. - Brembo Pinless lithium monoblok calipers (Full superbike calipers) - Unmarked Dymag lightweight race wheels with Brembo T drive discs front and rear with titanium bolts. - Modified rear subframe. - Quick release rear seat unit - Quattro Kawasaki Aluminium lightweight petrol tank Engine: - MSS stage two motor - Kit gearbox - Carbon Bellmouth Kit - MWR Superbike Filter - Titanium Arrow system 65mm Electronics: - Kawasaki Kit ECU - Kawasaki Kit wiring Loom - HM digital GPS Dash - Translogic quickshifter - Lightweight Lithium Battery Misc: - Hel brake lines - Accosato billet front master cylinder - Accosato rear underslung caliper - Active quick action throttle - Lightech rearsets - Billet Brembo rear Thumb brake - Mac radiators superbike rad with guards - Front mount expansion bottle - Rad shroud - Race chain, crash protection, bullet sliders - samco hose kit Spares Package: 1 x Spare Aluminium superbike tank. 1 x standard length pipewerx end can 1 x Spare brand new pipewerx Long titanium end can 101db 1 x complete spare set of new Dymag lightweight wheels with brembo T drive discs 4 x spare tank covers 3 x spare bellypan 2 x complete set of fairings inc seat units 1 x new radiator various lightech spares spare screen 1 x GB racing crash kit 1 x fuel pump Range of new front and rear sprockets 1 x ride height gauge tool k-tech front and rear springs and clutch springs Full 2015 Spare Superbike spec Ray Stringer Motor: - Vance and Hines CNC cylinder head, Stringer modified for improved mid range power. - Kent cams - Kit gearbox - Carbon Bellmouth Kit - Weight matched pistons. Please contact me with any questions and i am happy to tailor a package to suit your needs or budget. The bike is currently advertised on eBay with a few pictures however just drop me a text or whats app to 07796382113 if you would like more images or to speak with me about the bike. Asking £15995 for the bike with spares package (not spare motor) as it would probably break for more!!
  2. munro64

    Kawasaki zx6r

    2013 Kawasaki zx6 with V5 Thundersport champion winning bike. Rev 2 race build motor 124bhp Ohlins ttx front and rear Just serviced at the last bsb Ohlins race damper (thick oil) Brembo gp4 calipers Brembo rcs19 Brembo z04 pads Translogic shifter R&B billet velocity stacks Mwr filter Kit profiled cams Kit gasket Minimal head work Pc5 Renthal clip ons PP tuning rear sets Full titanium evo arrow 350 pipewerx silencer Gb race covers Carbon frame covers Woolich flashed ecu by P3 Spare wets and wheels I have plenty of spares that can go with the bike for extra This is a very capable bike and has been in the podium at nearly every meeting. Also taken lap records. The has been maintained regardless of the cost. Please text for any information as the reception at the house is terrible or email Sammunro57@gmail.com 0750620800 £7000
  3. For sale: Chain hook for the HRC swingarm. These have been used for many years by the Honda Racing team on their BSB and TT bikes and handy for keeping the chain out the way in wheel changes. Below is a pic. £30 posted. https://1.bp.blogspot.com/-_bSFRN3xuNk/WyqKMeiYJeI/AAAAAAAAEnk/WylZC4BOoVoefenXqXyCjARG7zVXtE-iACLcBGAs/s320/IMG_5379.JPG
  4. 2016 GEN3 BMW S1000RR | S 1000 RR | BSB Superstock Spec Race / Track Bike Full spec Sport model with performance pack, all riding modes enabled, traction control, quickshifter, auto blip, Pit lane limiter etc. V5 Present. BSB Superstock 1000 spec built and prepared by our BSB race team [Integro Motorsport - Tom Tunstall] as a spare bike and never been raced. Official BMW Motorrad HP Calibration kit enabled including HP power mode – matching this chassis/bike for life. [not flashed or temporary map!] Latest 2017 BMW Motorrad BSB HP map and firmware for Traction, Fueling, Engine braking strategies etc. · K-Tech DDS Front forks with upgraded valving spec and fresh fork oil [including spare springs and fork tools] · K-Tech DDS Pro Rear shock with upgraded valving, preloaded piston set up · Full ARROW 65mm Competition Race exhaust system with Titanium link pipes, Ti/Carbon silencer etc · GB Racing Engine / crash protection [full engine & bullet sliders] · GB Racing chain guard and stand bobbins · MotorcycleRaceParts Brake Lever Protector · Evotech Radiator and Oil Cooler Guards · Renthal GEN3 Clip Ons and Renthal Dual compound grips · Renthal Intelilever [unbreakable] brake lever · SBS Dual Sinter Race Brake Pads · Hel Brake Lines · Race Brake Fluid · Promach Rearsets · Race bodywork with race screen, full tank cover and seat + Alpha seat pad/base · Alpha Carbon Frame covers · Alpha Quick Release Fuel Tank Cap · Alpha ABS Pump Blanking Plate · Alpha side stand removal Plug · K&N Air Filter · Samco Coolant Hoses · New Renthal 520 Race Sprockets · New Tsubaki TX4 Pro Race Chain · New Oil and Genuine BMW Oil Filter · Lock wired Sump plug etc All suspension and gearing set up data provided for UK [and some Spanish] circuits Serious enquiries please call 07590 840055 Available for viewing/collection
  5. Selling, with a heavy heart, my fantastic Kawasaki ZX10R 2012. Engine setup by MSS Kawasaki, engine and gearbox refreshed by them last year and only done 2 race meetings since. Dyno run done on 8th Feb 2018 - video on link and printout attached. As you can see from the Dyno run it is all setup spot on. Did 2015-16 BSB Superstock 1000, was planned to do it again in 2017 but funding fell through. So only did 1 Thundersport and last BSB round at Brands Hatch. Loads of spec but main bits are: Kit ECU (mapped by MSS) Launch Control Quickshifter Bitubo fork internals KTech Shock Arrow Full exhaust system TRW Race Full floating discs TRW Pads TRW Rearsets etc etc etc. V5 present (currently SORNed) Its a fantastic bike made even better by the Kit ECU - I'm disappointed I won't be able to ride it any more! It was bought as a low mileage road bike by me and converted. It has never wanted for anything and always been tip top ready to race. Oil and filter changed after every round etc. In 3 years of racing we have NEVER a DNF because of a bike issue! Any questions or for further details please ask. link to Dyno video: https://1drv.ms/v/s!AvM2wYHtVyfnpplsepc16WcEGsp9tQ Not sure why but the forum won't let me add any pics other than a tiny one, so here is a link to all the pics I would have attached! https://1drv.ms/f/s!AvM2wYHtVyfnpulZWZPmVqnkPkktRQ £9495
  6. 2017 Kawasaki ZX10R Purchased brand new in April 2017 from G&S Kawasaki and built in May 2017 to compete in the International NorthWest 200 races in Northern Ireland Never been registered 1754 miles from new (including 500 miles run in) This bike was also used in the Superstock 1000 class in BSB, therefore the stock is as follows: CRC Bodywork Ktech DDS front and rear suspension Upgraded rear suspension reservoir Kawasaki Kit loom and ECU with the latest MSS map ABS removed and replaced by HEL lines GB Racing engine covers WSB Full Titanium Arrow system with PipeWerx end can MWR Race air filter Brembo brake fluid and Z04 pads PP racing rearsets R&G Titanium rad guard Active quick action throttle There are 2 sets of wheels available with the bike BUT they will be at extra cost. Make a sensible offer and you might be lucky and get a pair. This bike has always been run on Motul 300V oil and Kawasaki filters, oil replaced after each day, filter after the weekend. It was always maintained regardless of cost and runs faultlessly. At the last BSB round, the bike put out 204BHP. Please be aware, this bike has been used, please don’t expect to turn up and find a showroom condition bike. It has done 2 road races and 6 BSB rounds so has the odd battle scar here and there. Reason for sale is due to a change of manufacturer for the coming season. Price will be £13,000 NO VAT Will email pictures on request
  7. CPI Oliver City 50cc scooter _____________________________ Never registered for road use (est 8 years old). Only ever used as a paddock bike in BSB (2010 and 2014 >17), only 600km on the clocks. All lights, brakes, electric start etc works fine. Has Arrow performance stainless exhaust fitted. Could do with a new battery (£20 on eBay) and a new spark plug (£4). Other than that he's a good little whip. Has quick-release detachable towing attachment fitted and will also supply other fitment for buyer to attached to trailer. Also have printed service manual and 2 keys. Need it gone asap due to storage issue. Make me an offer and take him away...... Located in Keighley, West Yorkshire. Cheers
  8. This is my former British Superstock race bike for sale - it's a 2007 Gen II ZX10R in perfect condition with an amazing specification. Prior to me, it was owned by a Kawasaki enthusiast who bought the bike at the end of the 2007-8 season and did 1 trackday a year on it. I spent five days at Almeria on it this winter and it was superb - however, I need the money back now. It's been loved all its life, with Silkolene Pro 4 oil used throughout. Specification is superb: Kawasaki ZX10R Ex British Superstock full race bike. Spare bike for TMR racing Full V5 Ktech 20MM front fork internal Ohlins TTX rear shock, set up by Ktech GPR Steering damper Micron serpent full race system with G-Force cans (I also have the DB killers for 'quiet' circuits) Race head gasket Pipercross air filter Power Commander III HM quickshifter Brembo master cylinder and lever Vortex clipons Custom rearsets 520 conversion with CRV 3V titanium chain and sprockets R&G crash bungs. New Michelin KR 106/108 slicks with 3 trackday sessions on them (£355 a set!) plus some scrub tyres. It's in immaculate condition and has the original body work it came from the race team with in 2008 with no damage at all. Goes like a missile - 178rwbhp on the Chequered Flag Road & Race dyno and handles perfectly. Would make a superb rookie bike or a dedicated trackday bike. Sounds superb as well with the Micron system. £4250, but happy to take offers - need the money!
  9. 💥For Sale💥 - £13,200 Triumph Daytona 675R British Supersport race bike Top level British Supersport Triumph race bike for sale, selling as a package so loads of spares and bits and pieces available for any level of track racer/rider. Includes... Wheels Tank Fairings Gearing Springs Footpegs Stands Brakes/discs Contact me if interested!! Motec Ecu and aim data (telemetry) included as well as AIM dash unit! Please Share !! Please share!! Please share!! Have a look at Facebook for images. I cannot seem to get them on here. Look at either page. Bjorn Estment Ryan Estment https://m.facebook.com/story.php?story_fbid=10154669684956755&id=598761754
  10. icmiom

    Crew Chief

    Hello, Looking for a Crew Chief to run a Superstock team in BSB and at the NW, TT & UGP. Please message me if interested in more information. Thanks
  11. Rear tyre is: Pirelli Diablo Supercorsa 200/55/17. Compound SC2 Front tyre is: Pirelli Diablo Supercorsa 120/70/17. Compound SC2. British Super Bike tyres, only used for one session / race. £140 (tunbridge wells)
  12. Ohlins TTX25/FGR Gas fork cartridge kit for: Yamaha R6 (13S models - 2008 to 2015) Includes; full range of fork springs weights (8.5 to 10.5) 16 page owners/ set-up manual Used by front running British Supersport team and regularly maintained/ serviced by Ohlins BSB support. 12 months old - Retail price when new circa £1950 One kit available..... £795 for quick sale (including insured UK mainland delivery) Pls DM or text 07477 907030
  13. GSXR 1000 circa 2010/11 (K9?) Genuine Ex Alstare radiator from the Haslam , Guintoli era. Made by MB these are the top top the range radiators used by many of the WSBK and BSB teams . In great condition with very little use. Has the attatchments at the bottom for the oil cooler. £425 Plus P+P (UK only please) Tel. 0771 3508203 Please leave a message and a number and i shall call you back. Thank you.
  14. FOR SALE Pit garage boards/ display set with flight case Used in British Supersport by Team Appleyard Macadam Racing (Boards renewed in 2016) Each panel measures approx 2m x 2m There are sufficient panels and aluminium sections to cover 20 metres in length. All parts/ fittings and large flight case included. Can be viewed in use in garage at Brands Hatch BSB, round 2 (Easter 2017, 14th>17th April). (could be collected/ taken away on Monday 17th PM or delivered to Oulton Park at Round 3) £795 ovno 07730 563425
  15. FOR SALE Pit garage boards/ display set with flight case Used in British Supersport by Team Appleyard Macadam Racing (Boards renewed in 2016) Each panel measures approx 2m x 2m (consisting of a top and bottom board) There are sufficient panels and aluminium sections to cover 20 metres in length. All parts/ fittings and large flight case included. £795 ovno DM or call/text 07730 563425
  16. Suter Dry Clutch for GSXR 750 SRAD The Suter Dry Clutch was used in the Alstare WSBK Factory Team in 1999/2000 and also later on in BSB. In comparision to the kit or factory dry clutch the Suter uses a smaller shaft diamter with smaller shaft seal, which results in less friction losses. And another good thing is, that you still can get all the wear parts directly from Suter. So this is a big advantage. Or for example the plates are identical to Kawasaki ZX7RR Suter Dry Clutch or to modern Suter Ducati dry clutches. I have also explosion view with all part numbers. You can order all wear parts from Suter (Thomas Kuhn - t.kuhn@suterracing.ch ) This Suter Dry Clutch has a fully adjustable anti-hopping-system. Here is a bit more background information: The Suter Dry Clutch was made for XR09 factory (WSBK) engines. Which is basicly the latest factory spec for srad. The XR09 Crankshaft is different to early factory crankshafts. And also different to oem and kit crankshafts. The main problem are the 2mm reduced journal diameters, which require special bearings, which are not available anymore. And the primary gear on the crankshaft is different. (you can measure it by the outside diameter) At first i talked to Suter directly if its possible to make a new primary for the Dry Clutch, but they just said its too expensive to make just a few primaries. But then we found a company which was able to do it. It took almost a year and of course it was very expensive. (So the package is a bit more expensive because of the second primary gear) But now with this second primary gear its possible to use this Dry Clutch with all factory crankshafts, with all kit crankshafts and even in the standard road engine! This Suter Dry Clutch for SRAD is even rarer than factory dry clutches. The kit contains: Dry Clutch complete Magnesium engine cover extension for push rod The cover for the oil filler is self made. I will see if i got a O-ring in the right size here, i think so. One primary gear for xr09 crankshaft One primary gear for all other crankshafts Two clutch nuts Oil pump drive gear. Its identical to kit and factory part. You can keep std oil pump, just replace the driven gear. (Its not on the pictures) I've got PDF explosion view and PDF manual from Suter. Location of the Dry Clutch is Germany. PayPal is possible (Either "as friends" or additional with the fee). Or via IBAN. Shipping to UK is 60€ with DHL (Insurance up to 3000€). UPS would also be possible, but its a bit more expensive. The price for the Dry Clutch is 2200€, which would be around 1880 GBP at the moment. I could also supply a long gearbox intake shaft with corresponding first gear (Type A, which is the longest) So you could use the other gears from std gear box and you're ready to go. Okay somehow i can only attach pictures up to 70kb, which is nothing. The pictures are in my google drive: https://drive.google.com/drive/folders/0B66q4-7cHOqCMzFPVFVYYi1odlU?usp=sharing
  17. ZX10R 2011 with V5 7000 miles 2 Owners from new Engine was refreshed 3 rounds ago Spec:- K-Tech DDS25 Front fork internals K-Tech DDS Rear shock RCS 19 Front master cylinder Yamaha R6/R1 Calipers PipeWerx Exhaust Spare set of wheels (with Dunlop wets) Flashed ECU & Relocated HM Quickshifter Diamond Rearsets Diamond Clip-Ons Ohlins Steering damper Performance Technical brake lever guard Rain light R&G Crash bobbins R&G Engine covers R&G Exhaust hanger Carbon fibre frame protectors Carbon fibre swingarm protectors Renthal grips Multiple rear sprockets I bought this bike 2.5 years ago from of a 60 year old bloke that bought it from new. He used it for the road for about 4000 miles and then turned it into a track bike. I then bought it and added lots of extra bits to it... I've done about 6 race rounds on it, and 3 trackdays. A very nice looking 'Performance Technical' backed clean bike. Please txt or e-mail me for pics - Ollie 07730 149119 ojgreen@hotmail.co.uk £8500 ono
  18. Hi I have a 2015 Suzuki GSXR 1000 Crescent Suzuki WSBK frame from Randy De Puniets bike with Qatar 2015 wsbk stickers to prove.. Its a proper WSBK FTR braced and modified frame made to be used in conjunction with a fuel cell, the fuel cell mounts could be machined off if needed to fit a standard tank, the frame is specially braced in all four rear corners for stiffness (the same spec as Tommy bride well has been running in BSB this year) and I can provide pictures to show this and obviously all of the SBK mods including.... Side steering damper welded mount Welded side mounts for fairing Braced corners in rear of chassis Chain roller mounts Crescent fairing brace mounts Milled Headstock for special Yoke cups Welded plates for factory upper shock link This frame can be purchased for two reasons, like me to build a special.. or to hang on the wall as a piece of history.. Normal people would have never even heard about this and would assume that Wsbk or Bsb are just running standard frames but if you are as sad as me with GSXR's then you will know what I'm talking about.. this is a proper bit of kit! Please contact me for more details or photos only serious buyers please no messers.. £1450 o.n.o 07427163113 Regards Dan
  19. Appleyard Macadam Racing - Yamaha R6 FOR SALE 2016 model Yamaha R6 (unregistered but can be put onto a V5/ registered for the new owner). Built earlier this year and raced in the Dickies British Supersport championship by Andrew Irwin and Luke Hedger. To be sold as per exact specification ridden by Andrew Irwin at World Supersport event at Donington this season, giving 139hp. Spec as follows: Supersport engine to current BSB regulations, Prepared by FW Developments (engine use since new build in Feb: 521 miles) Vance & Hines CNC ported head (Full engine spec will be disclosed to interested parties at a later stage) Yamaha YEC KIT ECU Yamaha YEC KIT loom Latest spec Ohlins FGR152 pressurised fork cartridge kit Latest spec Ohlins TTXGP shock with quick release upper mounting Full titanium Arata exhaust system Brembo HPK brake discs and Z04 pads Brembo brake lever and remote span adjuster Dynojet quickshifter KTech steering damper CNC lock restrictors Lightweight alloy front air scoop/ clock bracket MAC Radiators- R6 Supersport radiator with Samco hose kit 520 chain conversion, range of sprockets/ gearing supplied Renthal GP clip-ons, bars and grips Supersport race bodywork, with high level screen Promach rearset/ footrest kit HEL performance brake lines GB Racing engine protection etc Domino quick action throttle Brake lever guard Captive/ quick change rear brake caliper Spare wheels with wets/rain tyres, with Brembo front discs and Supersport rear disc Data/ set-up for BSB circuits also provided Price: £12,995 + VAT Serious enquiries only please to 07730 563425 Any questions, please text or DM. Thanks
  20. 2016 Kawasaki ZX-10R BSB Superstock Integro Team Race Bike 2016 Kawasaki ZX-10R with x2 Keys – Used for the 1st 8 rounds of the 2016 BSB Superstock Championship. Race prepared to the highest Superstock spec by our race team in conjunction with MSS including: road kit removed [but still available], oil sump plug and filler drilled etc, plus £5000+ of extras and upgrades including: Engine, prepared and run in by MSS, includes MSS STK1000 clutch mods. Kawasaki UK BSB Spec ECU with Power Commander PCV - “Race” mapped DynoJet UK/FW Developments – 203BHP recorded at the time. K-Tech Rear Shock with upgraded damping set-up K-Tech DDS Fork Internals with upgraded damping set-up Brembo SBK Race Front brake disc upgrade HEL BSB spec brake lines [4 piece front – 1 piece rear] SBS Dual Sinter Race Pads Race Brake fluid Renthal Clip On's and grips Renthal “unbreakable” Front brake Lever Renthal “unbreakable” Clutch Lever Renthal Sprockets Tsubaki TX4 Pro race chain Full ARROW Competition Race Exhaust System, with Titainium/Carbon Silencer Race Bodywork & Screen Radiator Guard MSS Fairing brackets and tip switch bracket MSS Dash Bracket Key Switch relocation bracket with optional left hand switch bracket Rear Caliper Retaining Bracket Rectifier relocation bracket Translogic Quickshifter – Dual action/direction GB Racing crash protection kit – Engine and bullet sliders Full Samco Hose kit Inc heavy duty Samco clip kit Harris Tank Cap Explosafe tank foam fitted MSS Lock Stops Promach Rear Sets Front Brake Protector MSS ABS Pump blanking kit [pump only still fitted to 2016 regulations] Kawasaki Kit Clutch/Generator cover Gaskets NGK (Surface Discharge) Race Spark Plug set Captive Wheel spacers Set-Up data sheets (inc suspension/gearing etc) Spares included: Spare Renthal Race Sprockets Oil and Filter £14,250 ono Road fairings and other spares available Any questions please call 07590 840055
  21. For sale 2013 cbr 600 - everything refreshed for 2016 TT no V5 as the bike was purchased from Honda UK for race use only The bike is as finished the Supersport 2 race. This is a competitive race bike package with a full spares package. The bike its self - full Chris Mehew engine/STM clutch/kit first gearLatest Maxton gas suspension kit in the forksMaxton rear shockFull TI bolts the bike weights 161kg as current Supersport regsKit ECU and Loom bought new from padgetts before the TT HM shifter new before the TTLeo vince world Supersport systemHRC kit steering damperLatest MWR air filter with adjustable baffle platePazzo levers Hel linesModified big tank for the TTSES cliponsTen Kate rear caliper captive mountHRC radRB engineering bell mouths Spares package -Spare engine - same spec as the motor in the bike expect this one has Carrillo rods, this motor has done 0miles since its refresh - this motor was a spare for the TT but not used - usual cost for a motor this spec would be £7500 Other spares include - Rolling chassisFull Leo vince system Wheels x2 pairs 2012 designWheels X1 pair 2013 design1 x frame1 x swing armBig bora radiator2 x new tanks with fuel pumps2x new sets of bodywork (painted)Pazzo leversSamco hose kitGB coversSBS dual carbon padsBrembo brake pads (still in packets)7sets of spare footrest platesSprockets Friction plates £15,500serious enquires call Craig on 07841837813pictures available via emailcraigneve@hotmail.com
  22. 2016 Kawasaki ZX-10R Spare Team Bike (New) 2016 Kawasaki ZX-10R with V5 and x2 Keys – Bought from MSS/Colchester Kawasaki as a spare bike for our BSB STK1000 Team 0 miles bike race prepared by our race team including: road kit removed [but still available], oil sump plug and filler drilled etc, plus £4000+ of new extras and upgrades including: Engine built, prepared and run in by MSS [Dyno run-in mileage only], includes MSS STK1000 clutch mods. K-Tech Rear Shock with upgraded damping set-up [used x6 times] Brembo SBK Race Front brake disc upgrade [light use] HEL BSB spec brake lines [4 piece front – 1 piece rear] - NEW SBS Dual Sinter Race Pads Race Brake fluid - NEW Renthal Clip On's and grips – NEW Renthal Sprockets – NEW Tsubaki TX4 Pro race chain – NEW Full titanium exhaust with ARROW link pipe and Silencer – NEW CRC Bodywork [painted black] – NEW Fairing brackets and tip switch bracket - NEW Power Commander PCV - “Race” mapped DynoJet UK/FW Developments - NEW Translogic Quickshifter – Dual action/direction – NEW GB Racing crash protection kit – Engine and bullet sliders – NEW Full Samco Hose kit Inc heavy duty Samco clip kit – NEW Harris Tank Cap – NEW Explosafe tank foam fitted MSS Lock Stops – NEW Promach Rear Sets – NEW Front Brake Protector – NEW MSS ABS Pump blanking kit [pump only still fitted to 2016 regulations] - NEW Kawasaki Kit Clutch/Generator cover Gaskets NGK (Surface Discharge) Race Spark Plug set - NEW Captive Wheel spacers Spares included: Spare Renthal Race Sprocket Oil and Filter Road fairings etc £13,750 ono Any questions please message or call 07590 840055
  23. 2013 Kawasaki ZX10R ex BSB Superstock race/track bike for sale. Build by PCR and run under IDAQ colours for the 2013 season (Paul Curran’s race bike), bought at the end of 2013 by me to be used as a track-day bike. Fully serviced at the end of each year (front to back including suspension) by PDQ in Taplow, with no expense spared in looking after the bike including oil and filter change after every event (Putoline Nanotech oil and K&N filter). Gear box serviced at end of 2014, with new 2nd & 3rd gear put in along with new clutch pack, only issue is dash gear readout in race mode sometimes misses shifts due to quick shifter wrt readout but is intermittent and never been a problem. V5 in my name. Only used once this year since last service. Spec: Bitubo suspension front and year (ECH 29 Fork gas pressurised cartridge kit + XXF rear shock) Power commander 5, race air filter & custom map (dyno readout at 198bhp on PCR dyno) Full Arrow race exhaust system + removable baffle Bitubo steering damper (new this year) Brembo superbike discs Castellated piston kit Bendix brake pads Fuel tank foam GB engine cover set 520 chain and sprockets (new this year plus 3 spare rear sprockets various sizes) Frame covers, tanks sliders + crash bungs Radiator guard Braded hoses front and rear (new this year) Samco blue hose kit Front and rear axles adapted to aid wheel changes (using axle guide sliders) After market lock stops Race clips-ons and grips Lightech chain adjusters Promach rearsets Quick action throttle + brake guard Stand bobbins & Shark Fin CRC Fairings (IDAQ colours) HM Quickshifter BST carbon wheels No WOW as never used in the rain. In very good condition (but is a track bike so has some stone chips etc), couple of marks on the seat unit where it toppled over against the side of the van, but this has been reinforced on the in-side so as not to compromise the integrity of the unit. £8500 ono PM or text for more info and pictures (as can't upload to here due to size), only selling as moved onto 2016 model. Andy 07802 204732
  24. Unwanted Christmas gift. £20 delivered. Payment through PayPal.
  25. 2014 Triumph Daytona 675R Superstock Bike This bike was built from new in August 2014 for racing in the National Superstock 600 championships. Has all frame and engine numbers. Bike has completed 5 races in 2014 and every round of the 2015 National Superstock championship. Engine has just been refreshed by FBM Performance (21/09/2015) and will only do the two remaining BSB race meetings (Receipts to prove this) Spec: Engine built by FBM Performance (I have all receipts and performance print outs available)KTECH DDS Fork kitKTECH DDS Rear shockPit-bull Race Steering Damper MWR Race Airfilter T3 Titanium Race System with Scorpion CanStandard Triumph Quick Shifter Clip- Ons Bonamici Rearsets Hel Brake Lines (New 4 rounds ago) Brembo Brake Discs R&G Engine Covers & Crash Protection Race Fairings Rain Light Quick Action Throttle SES Brake Lever Guard SES Steering Limiter 428 Chain Kit ConversionTank Foam Lithium light weight battery SDS Duel Sintered Race Brake Pads Bazzaz Fuel Control Unit TWM Brake & Clutch Lever TWM Fuel Quick Release Fuel capCarbon Frame & Swing arm Covers Starline GPS Lap Timer Eazi-Grip Tank Grips This bike is maintained to a very high standard and is very tidy. Extremely strong competitive bike in any 600 class racing or the ultimate toy for track days J The bike will be available after the last race at Brands Hatch BSB Any questions please don’t hesitate to get in touch.
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.