Jump to content

Mach 2

Members
  • Content Count

    44
  • Joined

  • Last visited

Community Reputation

0 So So

About Mach 2

  • Rank
    JFDI Racing
  • Birthday 05/24/1958

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Mach 2

    Captured Spacers

    Captured Spacers made to order. Contact Darren at ftdtechnical@btconnect.com. Darren has made many partsfor me over the past 8 years, a good lad. He will make most parts if you can provide a drawing. Little jobs like bushes to adapt ER6 front spindle to fit ZX6 forks so i can run ER6 front wheels etc etc
  2. Mach 2

    Captured Spacers

    Captured Spacers made to order. Contact Darren at ftdtechnical@btconnect.com. Darren has made many partsfor me over the past 8 years, a good lad. He will make most parts if you can provide a drawing. Little jobs like bushes to adapt ER6 front spindle to fit ZX6 forks so i can run ER6 front wheels etc etc
  3. Advance Ad , bike available shortly. Its a good & honest bike 72 bhp Kawasaki Er6 Minitwin / Stocktwin The bike is for sale as i have built myself a Supertwin/Hybrid-Minitwin based on an Er6. I have owned and raced this bike (maybe 6/7 race weekends in total) for the past 2 years since it was converted from a low mileage Cat C road bike. It has always been well maintained. As you will see in the photo’s its a clean, straight & well presented bike. V5 present & in my name. Also, Recent dyno printout’s to confirm power output, including BEMSEE compliance dyno run Dm or call 07816 317282 and i will email photo’s showing motor stripped etc Recent Engine refresh (see photos) included: Cylinder Head de-coke Valves checked and lapped-in Valves re-Shimed Cylinder Bores checked Pistons & Rings replaced Oil pump stripped and checked Sump removed & strainers cleaned - no metal residue found Clutch assembly reconditioned. The engine has only done a ‘shakedown’ run-out since the it was refreshed so it will need some running-in. (To Be Done, next week) Engine Oil (Motul) & filter (K&N) changed after the ‘shakedown’ run. The Front forks have been stripped, cleaned & inspected for wear. New main seals fitted & replenished with Castrol 15W. They have only been used on the ‘shakedown’ run since being rebuilt. Fitted with Power Commander 5 & map switch Fitted with Aim Mychron 4 dash/rev counter : this dash also supports data logging: lap timing, engine temp indicator etc Accessory cables are readily available SES clip-ons Fitted with R6 foot rests (rear sets) Braided Brake hoses front & rear Honda race rear brake reservoir Wilber rear shock Keyless ignition Minimised wiring harness Race fuel filler Akrapovic Can with db killer Race Air Filter Spare airbox cover - modified Spare Sprocket Carrier Spare Rear Wheel Power commander maps: One when in Bemsee compliant mode One when in ‘Tweeked’ Mode Whilst i cannot give any guarantee’s you will see from the photo’s & text that this bike is ready to compete. With regular basic maintenance and some mechanical nonce/sympathy when racing it it should be good for 2 seasons club racing before needing a refresh. £3450 ovno
  4. As title says race Cams for 2006 ER6 wanted. Pls msg 07816 317282
  5. Considering modifying a couple of sets of ER6 throttle bodies - boring out to 42mm and tapering the input. Have done one set and they are fitted to my bike - she runs well. Pricing, we are thinking £300 or £250 with your throttle bodies. The intention is to produce a set using 'standing' stock then sell when done, this allows us to do the work when we can with no pressure.
  6. Pair of performance cams wanted
  7. Mach 2

    Looking to stay in Ireland

    http://abnb.me/EVmg/ATgxbwtTjG
  8. Mach 2

    Kawasaki ER6 Supertwin

    Did the bike sell?
  9. Wanted Arrow header pipe for a 2006 KawasakiER6 Please contact Elfed on 07816 317282
  10. Mach 2

    ER6 Dyno

    I am in South Wales, but thanks for recommendation
  11. Mach 2

    ER6 Dyno

    who would people recommend to dyno set up Kawasaki ER6 Minitwin
  12. Mach 2

    ER6 Dyno

    Can anyone recommended someone to Dyno and setup a Kawasaki ER6 Minitwin
×

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.